Ota yhteyttä
Sulje
ROGER™ GNSS Amplifier & Splitter is a combined signal splitter and line amplifier that can
transmit amplified signal to up to three separate repeater units.
Amplifier has a gain of +16dB at the GPS L1/L2/GLONASS/GALILEO frequency bands and it
includes a filter to remove unwanted signals that may have entered the cable at some point.
Splitter is a one to three signal splitter that can transmit signal to up to three separate GNSS
(Global Navigation Satellite System) repeater units.
Amplifier is powered through the output signal cable by the ROGER™ GNSS Repeater and
also passes on DC power for the ROGER™ GNSS Splitter, an another GNSS line amplifier or
GNSS receiving antenna.
The splitter & amplifier is easy to use and permits a wide range of system configurations.
Size
110*143*28mm
Weight:
195 g
Operating temperature:
-25 - +55°C
Connectors:
TNC female input TNC female output
Frequency range:
1200-1700 MHz
Noise figure:
<5 dB
Impedance:
50Ω
Gain:
+16dB
Splitter section
.
Connectors:
TNC female input, 3xTNC female output 1 x +12 dB with amplifier section or 1 x -4dB without with DC input from repeater 2 x +4 dB with amplifier section or 2 x -12dB without. DC blocked for repeaters
Power Supply:
The amplifier&splitter is powered through the RF input connector from the ROGER GNSS Repeater
Frequency range
1200-1700 MHz